If I turned the crown on my rolex watch counter clockwise to adjust the date did I damage the movement?

Posted by admin2 CommentsApr 27, 2011

I just recently bought a rolex for my boyfriend. I was adjusting the date and it said to pull the out to the first notch and then turn clockwise to change the date. When I did that the date did not change so I turned it counterclockwise and the date began to change. When I was reading on the internet about it, some sites said that it would have no affect on the watch and others said it could damamge the movement? did I damage the movement since the date wont change when I turn the crown clockwise? HELP!! this was an expensize watch!

What is a nicer watch, a rolex or a Breitling?

Posted by admin4 CommentsApr 24, 2011

I really like breitlings, I can get a quality watch with the same exact movement as the rolex but for a lot cheaper. And also I can get a special addition watch for only 20K from Breitling but around 40K from Rolex.
And Breitling comes with all those little numbers that can tell fuel consumption, etc. that is so cool.

Rolex selfwinding watch movement question?

Posted by admin2 CommentsApr 22, 2011

I have a rolex watch, a men’s datejust selfwiding watch. If i put the watch down for about 14 hours it stop running. I would assume that the winding mechanism would allow the watch to run on its own longer than 12-14 hours from letting the watch sit. The watch is probably from the mid 70’s so I’m wondering if this is normal for a watch from that era.

Rolex ETA Watch Movement?

Posted by adminNo CommentsApr 21, 2011

Are there any other watch manufacturers that have the same perpetual motion movement on the rolex ’s second hand ? or is it patented ?

The Best Answer

The term “movement” refers to the “guts” of the watch.  The guts of most Rolex models are unique to Rolex, and are patented.  They work pretty much the same as all other self-winding watches.  You can see a Rolex 2235 movement here:  http://www.replicawatchesblog.com/rolex-2235-observations-and-basic-tech-information/

This is the “movement” used in most, but not all non Rolex, self-winding swiss watches

Japanese “movements” are used in mid-range “self-winding” watches that cost under $200.  Chinese “movements” are used in all the cheap throw away “self-winding” watches.

Now that I told you what a “movement” is, I assume you are speaking of the “smooth movement” exhibited by the second hand on a Rolex.  Said motion is not all unique to Rolex, it is not patented by Rolex, nor was it invented by Rolex.  Nearly all “self-winding” watches exhibit said motion.  And the difference between them is so little that in most cases you can not see the difference.

“Perpetual” is just a Rolex trademark for “Automatic” or “Self Winding”.   You can not trademark a pre-existing term like “Automatic” or “Self Winding” so Rolex came up with their own name.  Most modern manufactures say “Automatic”.  No matter what the name, it all means the same.

Most uneducated people incorrectly call the “smooth second hand”  a “Sweep Second Hand”.  A “Sweep Second Hand” means the second hand is attached at the center of the face, and not sitting in a sub dial.  You are almost hard pressed to find a watch without a “Sweep Second Hand” these days.

Almost ALL “self winding” watches have a “smooth” second hand.  They might not move as smooth as a Rolex, but you will never be able to tell.  Most premium watches like Omega, Bertling, Tag, Buliva, etc have  the same, near the same, or even smoother movement of their second hand.

You can buy “automatic” watches with Japanese “movements”, and second hands that move as smoothly, or almost as smoothly as a Rolex just about anywhere.  See here:

Even Wal-Mart sells them for under $100.  You can find some on E-bay for under $20.

.

Rolex 2235 Observations and Basic Tech Information

Posted by adminNo CommentsApr 21, 2011

Accuracy and reliability are the result of intelligent design with well thought out compromises, executed as superbly as possible. Examining the movements that fit into this category does highlight a few important areas that seem common to most of them.

I’m very impressed with rolex’s new movement. I really take my hat off to them for not sitting on their laurels, because there really was no pressing need for them to update their already accurate and reliable Cal. 2135. While other movements do match it, both in terms of precision and reliability, none do it with the volume and consistency of Rolex

Basic technical info for the 2235:

Diameter = 20mm
Casing diameter = 19.7mm
Height = 5.95mm (5.4mm for the non-date Cal. 2230)
Jewels = 31
Power Reserve = Approximately 50 hours

So what exactly is it that makes this movement so special? Or to rephrase the question, how come this movement is so accurate and reliable? Beats me if I know!! To be perfectly honest, I think that it is just a great design with compromises that have been intelligently chosen and superbly executed in its best incarnation. It incorporates all the latest knowledge and advances in both materials and movement design. Its generous supply of available torque means that it will not be easily stopped, even when powering extra complications.

Let me know if I’ve left any of your favorite movements out, and I’ll gladly comment on them.

Rolex Model Code Information List

Posted by adminNo CommentsApr 21, 2011

Oyster Perpetual – 10, 140, 142
Airking – 55 & 140
Date – 15 & 150
Datejust – 16 & 162
Daytona Manual Wind – 62
Daytona Cosmograph – 165
Sea Dweller – 16 & 166
Submariner – 16, 166 & 168
Submariner (no date) – 55 & 140
GMT Master – 16, 65, 167
GMT Master II – 167
Oysterquartz Datejust – 170
Oysterquartz Day-Date – 190
Day-Date (President) – 65, 66, 18, 180, 182 & 183
Yachtmaster – 166, 686 & 696
Midsize Oyster Perp DJ – 68, 682
Ladies Oyster Perpetual – 67, 671, 672
Ladies Date – 65, 69, 691 & 692
Ladies Datejust – 65, 69, 691 & 692

0 Polished
1 Finely Engine Turned
2 Engine Turned
3 Fluted
4 Hand-Crafted
5 Pyramid
6 Rotating Bezel

Differences Between Swiss ETA, 7750 and Japanese Movements

Posted by adminNo CommentsApr 21, 2011

ETA: ETA SA swiss Watch Manufacturer

7750: Valjoux 7750

Japanese movement

Generally speaking, the  quality among these three kind of movement is like this:
ETA > 7750 > Japanese.

That’s why Japanese movements are 10-30% of the price of a swiss movement.

Most watch companies are using the ETA or Valjoux 7750 to make their watches, except the rolex, as rolex make their own movements.

So almost all the other watch company just use the same watch movement, the only differences are the decoration, they just modify them with extra functions, like jewels, etc.

The movement is where the watch was made, the movement is generally a sign of the quality of the watch. jap movements along with chinese movements are the cheapest.
If you get a swiss movement, they are generally regarded as the best.
The movement is basically the internal workings of the watch, the better the quality the longer it will last and the smoother the hands go round.